Making Conventional Dispatch Calls - Motorola MTX-800 Classic User Manual

private call does not get through, you will hear an illegal mode tone.
Press the PTT to try the call again, or press the "Private Response"
button to clear the tone and exit to dispatch operation.
When the called party responds, press the PTT to talk; release it
to listen.
You may hear a ring followed by a busy tone. Your call got
through, but the system is temporarily busy and the called radio is in
queue for an available channel.
When the Private Conversation is finished, press the "Private
Response" button to receive normal dispatch calls.
Making Conventional Dispatch
Calls
Select a conventional channel
using the toggle and rotary select
switches.
Press the PTT to talk. If the red
LED is lit, you are transmitting
normally (the channel is clear to use).
If you hear someone else talking
while the PTT is held, the channel is
in use. Release the PTT and try your
call again later.
When you have finished talking
(transmitting) release the PTT switch
to listen (receive).
M
T
X
-
9
0
0
C
L
A
S
S
I
C
T
Y
P
E
II
43