20 installation instructions electrolux washer-dryer
Installation instructions
Unpacking
All transit bolts and packing must be removed before using
the appliance.
You are advised to keep all transit devices so that they can
be refitted if the machine ever has to be transported again.
1. After removing all the packaging, carefully lay machine
on it's back to remove the polystyrene base from the
bottom.
2. Remove the power supply cable and the draining and
inlet hose from the hose holders on the rear of the
appliance.
3. With a suitable spanner unscrew and remove the
central rear bolt A. Slide out the relevant plastic spacer.
4. Unscrew and remove the two large rear bolts B and the
six smaller bolts C.
5. Remove the bracket D and tighten up the six smaller
bolts C.
6. Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.