Technical Data; Definitions: Safety Guidelines - DeWalt XR Li-ION DCN690-XE Instruction Manual

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: indicates a practice not related to personal injury which, if
not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
CALL US AT: 1800 338 002 (Aust) or 0800 339 258 (NZ).

Technical Data

DCN690
Voltage V 18
DC
Speed mode 1
Actuating mode Bump/
Sequential
Magazine angle 33°
Fasteners length mm 50–90
shank diameter mm 2.8–3.3
angle 30–34°
head geometry clipped or offset
round
collation type paper
Weight (without
battery pack)
L
K
L
K
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
WALT TOOL,
E
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to compare
DCN691 DCN692
one tool with another. It may be used for a preliminary assessment of exposure.
18 18
1 2
of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
Sequential Bump/
significantly increase the exposure level over the total working period.
only Sequential
33° 33°
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the
50–90 50–90
job. This may significantly reduce the exposure level over the total working period.
2.8–3.3 2.8–3.3
Identify additional safety measures to protect the operator from the effects of vibration
30–34° 30–34°
such as: maintain the tool and the accessories, keep the hands warm, organisation of
clipped or offset clipped or offset
work patterns.
round round
paper paper
1
kg 3
(sound pressure) dB(A) 84
PA
(sound pressure dB(A) 3
PA
uncertainty)
(sound power) dB(A) 95
WA
(sound power dB(A) 3
WA
uncertainty)
h
a = m/s² 3.8
h
Uncertainty K = m/s² 1.5
WARNING: The declared vibration emission level represents the main applications
3 3
84 84
3 3
95 95
3 3
3.8 3.8
1.5 1.5