EN GLI SH 18V XR LI-ION CORDLESS FRAMING NAILER DCN690 Congratulations! may significantly increase the exposure level over the total working period. You have chosen a D WALT tool. Years of An estimation of the level of exposure to experience, thorough product development and...
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed DCN690 (grounded) power tools. Unmodified plugs WALT declares that these products described and matching outlets will reduce risk of under Technical Data are in compliance with: electric shock.
Page 7
EN GLI SH Use personal protective equipment. Maintain power tools. Check for Always wear eye protection. Protective misalignment or binding of moving equipment such as dust mask, non-skid parts, breakage of parts and any other safety shoes, hard hat, or hearing protection condition that may affect the power used for appropriate conditions will reduce tool’s operation.
EN GL IS H Safety Instructions for Cordless Residual Risks Nailers The following risks are inherent to the use of these machines: • Always assume that the tool contains – Injuries caused by improper handling of the tool. fasteners. Careless handling of the nailer can result in unexpected firing of fasteners and –...
EN GLI SH Important Safety Instructions for All • Do not use an extension cord unless it is absolutely necessary. Use of improper Battery Chargers extension cord could result in risk of fire, electric shock or electrocution. SAVE THESE INSTRUCTIONS: This manual contains important safety and operating instruc tions •...
EN GL IS H A cold battery pack will charge at about half the rate Charging Procedure (fi g. 2) of a warm battery pack. The battery pack will charge at that slower rate throughout the entire charging 1. Plug the charger into an appropriate 230 V cycle and will not return to maximum charge rate outlet before inserting the battery pack.
Battery Pack Do not expose to water. BATTERY TYPE The DCN690 operates on an 18 volt battery pack. Have defective cords replaced The DCB180, DCB181 or DCB182 battery packs immediately. may be used. Refer to Technical Data for more information.
INTENDED USE When using a cable reel, always unwind the cable completely. The DCN690 cordless framing nailer has been designed for driving nails into wooden workpieces. DO NOT use under wet conditions or in presence of flammable liquids or gases.
Page 13
EN GLI SH ASSEMBLY AND ADJUSTMENTS store battery packs out of the tool or charger in a cool, dry location. WARNING: Prior to assembly and adjustment, always remove the Rotating Rafter/Belt Hook (fi g. 6) battery pack. Always lock off the The rafter/belt hook (j) and can be easily positioned tool before inserting or removing to the left or right of the tool to accommodate left- or...
EN GL IS H 2. To sink a nail deeper, rotate the depth NOTICE: NEVER adjustment wheel (d) to the right, toward the spray or in any other deeper nail icon. way apply lubricants or cleaning solvents inside Selecting the Mode (fi g. 1) the tool.
EN GLI SH Using the Trigger Lock-off (fi g. 3) Clearing a Jammed Nail (fi g. 1, 3) Each D WALT nailer is equipped with a trigger lock- If a nail becomes jammed in the nosepiece, the off (b) which when pushed to the right as shown jam/stall indicator light (e) will flash.
EN GL IS H Protecting the Environment Separate collection. This product must not be disposed of with normal Lubrication household waste. Your power tool requires no additional lubrication. NOTICE: NEVER Should you find one day that your D WALT product spray or in any other needs replacement, or if it is of no further use to you, way apply lubricants or...
Page 17
EN GLI SH GUARANTEE WALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user.
EN GL IS H TROUBLESHOOTING GUIDE MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW. For more serious or persistent problems, contact your nearest authorised D WALT repair agent, or contact your D WALT office at the address indicated in this manual. WARNING: To reduce the risk of serious personal injury, ALWAYS lock off the tool and disconnect battery pack from tool before all repairs SYMPTOM...
Page 19
EN GLI SH TROUBLESHOOTING GUIDE (continued) SYMPTOM CAUSE Drive blade continues to get Jammed nail and driver blade is stuck in Use stall release lever, clear and jammed nails, stuck in down position down position and return driver blade manually if necessary. Damaged driver/return assembly Replace driver/return assembly.