Ipv6 In Ipv4 Tunnel (Stateful) - D-Link DIR-600 User Manual

Section 3 - Coniguration
To conigure the Router to use a 6rd Stateful connection, conigure the parameters in the LAN Address Autoconiguration
Settings section as described below:
Enable Check to enable the Autoconiguration feature.
Autoconiguration:
Select Stateful. Refer to the previous page for Stateful.
Autoconiguration
Type :
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6 range for your
(Start) : local computers.
Enter the end IPv6 Address for the DHCPv6 range for your
IPv6 Address Range
(End) : local computers.
Router Enter the Router Advertisement Lifetime (in minutes).
Advertisement
Lifetime :
Click the Save Settings button to save any changes made.
D-Link DIR-600 User Manual
IPv6

IPv6 in IPv4 Tunnel (Stateful)

67