Green Routing; Road Safety Cameras And Other Proximity Alert Points - Clarion NX501A Owner's Manual

x
x
For further information about Route settings, see page 69.

4.1.4 Green routing

Route calculation is not only about finding the quickest or shortest route. For some of the
vehicle types, you can also check the fuel consumption and CO
route, and you can create cost effective routes with less effect on the environment.
In Settings, select
the average fuel price. You can also select whether you want to see the difference between
your route and the green route even if the selected routing method is not Green.
After the above parameters are set, select
get a fast but also fuel efficient route. Note that travel cost and CO
estimations only. They cannot take elevations, turns, curves and traffic conditions into
account. Also, this routing is not meant to give you the "greenest" route of all. It is still
important to travel quickly so the result is a fast route with low fuel consumption and CO
emission.
With a vehicle type where green routing is selectable, whichever route planning method is
selected, the Green details are also shown when you confirm the route:
If the selected route planning method is not Green, and you have allowed the application to
show the green alternative, the price, fuel consumption and CO
between your selected route and the Green route are also shown on this screen:
Tap the field with these details to switch the route to Green immediately.

4.1.5 Road safety cameras and other proximity alert points

There is a special proximity warning for road safety cameras (like speed or red light cameras)
and other proximity alert points (like schools or railroad crossings). These alert points are
64 NX501A English
to enter the necessary parameters of your vehicle and
emission when planning a
2
as route planning method to
emission calculations are
2
emission differences
2
2