Samsung 670 Installation Manual page 21

Menu
Eco
Energy Saving
Solution
Welcome Message
Edit Welcome
Message
Hospitality Logo
Logo/
Message
Hospitality Logo
Logo Display Time
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto
Intialize
REACH 3.0
REACH 2.0
REACH Channel
Group ID
IPG Room Type
Ticker
REACH
Solution
REACH Update
Time
REACH Update
Immediate
Room Number
REACH 2.0 TV
Sound
REACH 2.0 Server
Version
[HC670_677_678-ZA]Install Guide-X0ENG.indd 21
Item initial Value
Adjusts the brightness of the TV to reduce power consumption.
y Off: Turns off the energy saving function.
Off y Low: Sets the TV to low energy saving mode.
y Medium: Sets the TV to medium energy saving mode.
y High: Sets the TV to high energy saving mode.
OFF Displays a the Welcome Message for 5 seconds when the TV turns On.
Edits the Welcome Message.
Turns the Hospitality logo feature On or Off, If On, when the TV is turned
OFF on, the Logo is displayed, before the signal from the initial source, for the
amount of time set in "Logo Display Time".
Downloads the Hospitality logo.
Hospitality logo file requirements:
... y BMP or AVI files only.
DL
y Max file size : BMP - 960 X 540. AVI - 30MB.
y The file can only be named samsung.bmp or samsung.avi.
... Hospitality Logo Display Time (3/5/7 seconds).
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on,
OFF
the guest side menu items are restored to their cloned values. See page 29.
OFF:Close REACH 3.0
OFF
ON:Open REACH 3.0
OFF:Close REACH 2.0
OFF
ON:Open REACH 2.0
87:Assign a DTV channel number to carry the update REACH data. This
...
channel number must be the same as the number set on the Reach server.
All:Select the group ID of the REACH server. (Refer to the REACH server
...
manual for more details)
You can receive up to 3 EPG information headed to the Americas according
to Room Type from SI, and it displays the appropriate channel list and EPG
... information according to the value set on TV.For IPG Room Type, there are
Default / Public / Roomtype3 within the hotel Factory Install menu, and its
default value is Default.
y On : The TICKER content is displayed.
...
y Off : The TICKER content is not displayed.
Lets you set when data such as updated SW, cloning files, and S-LYNC
REACH contents is downloaded from the REACH server to the TV :
y 1hour : Every hour
y 2hour : Every 2 hours
...
y 12:00 am : every 12:00 a.m.
y 12:00 pm : every 12:00 p.m.
y 2:00 pm : every 2:00 p.m.
y On : Whenever the TV enters standby mode (the power cord is plugged
...
y Off : The REACH data is only updated on the TV at the REACH server
... Setting Room Number.
OFF:Close REACH 2.0 TV Sound
...
ON:Open REACH 2.0 TV Sound
... 0000:Displays the current REACH data version.
Description
in and the power is off), the REACH data is updated on the TV.
update time.
21
English
2014-03-17 10:02:27