HC678 Model
- SIDE -
HDMI IN 2
(DVI)
1
HDMI IN 1
2
(5V 0.5A)
/ CLONING
AV IN
3
✎
Whenever you connect an external device to your TV, make sure that the TV and the device are turned off.
✎
When connecting an external device, match the color of the connection terminal to the cable.
HDMI IN 1, 2 (DVI), 3 (ARC)
1
✎
No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
✎
Use the
HDMI IN 2
(DVI to HDMI) for the video connection.
USB / CLONING
2
– Connector for software upgrades and Media Play, etc.
– Service connection.
VIDEO / L-AUDIO-R
3
– Connect a VIDEO cable to an appropriate external A/V device such a VCR, DVD, or Camcorder.
– Connect audio cables to "L-AUDIO-R" on your TV and the other ends to corresponding audio out jacks on the A/V
device.
EX-LINK
: Connect this jack to the jack on the optional RJP (Remote Jack Pack). The RJP allows you to connect external
4
devices (Camcoders, PCs, DVD players, etc) easily.
AUDIO OUT
: Connects to the audio input jacks on an Amplifier/Home Theater.
5
ANT IN or AIR/CABLE
6
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver.
DATA
7
– Used to support data communication between the TV and the external SBB or STB.
– Connects using an RJ-12 type of plug.
GAME CONTROL DATA
8
– Used to connect the Lodgenet game controller in the Lodgenet system or support data communication between the TV
and the external SBB or STB.
– Connects using an RJ-12 type of plug.
10
English
[HC670_677_678-ZA]Install Guide-X0ENG.indd 10
8
HDMI IN 3
HDMI IN
1
3 (ARC)
(ARC)
GAME
CONTROL
DATA
EX-LINK
4
5
AUDIO OUT
: Connects to the HDMI jack of a device with an HDMI output.
jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter
6
2014-03-17
10:02:23