Using The Channel Setup Menu - Sony Trinitron KV-20FS100 Service Manual

Using the Channel Setup
To access the Channel Setup menu, refer to the following steps:
To Display To Highlight
Favorite
Press
Channels
1 Use the
Quick access
a favorite channel. Then press
to favorite
2 Using the
channels
3 Press
4 Press


To use Favorite Channels: Exit all menus and press
the desired channel number and press
Cable On: Select if you are receiving cable channels with a CATV cable.
Off: Select if you are using a TV antenna.


After changing your cable settings, you will need to perform Auto Program. When
Channel Fix is set, you will not be able to use your cable settings.
Channel Fix 2-6: Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use the
cable box's or VCR's remote control for channel selection.
Video 1: Select from available video inputs when you have connected
video equipment (e.g. satellite receiver) and you want your TV fixed to it.
Off: Channel Fix is not set.
Auto Program
Press
Perform Auto Program whenever setting up your TV.
The TV will scan through all available channels and program receivable
channels.
22
To Select
g
to open Favorite Channels menu:
F f
or buttons to select the position (1-5) where you want to set
F f
or buttons, select the desired channel.
to change to the channel selected.
G
to return to the Channel Setup menu or press
g
to perform Auto Program.
Menu
Channel Setup
Favorite Channels
Cable : On
Channel Fix : Off
Auto Program
Channel Skip/Add
Channel Label
Move
.
. Press F or f to move the cursor to
.
Using the Menus
End
Select
to exit.