Sony Trinitron KV-20FS100 Service Manual page 146

TV, VCR, and Cable Box
2
Cable Box
1
From cable
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack
on your VCR.
3
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.


If you will be controlling all channel selection through your cable box, you should consider
using the Channel Fix feature by setting your TV to channel 3 or 4 (see page 20).
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting
Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.


You can use the


For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO
does not provide sound; the audio cables must still be connected.
3
VCR
Optional connection
button to switch between the VHF/UHF and VIDEO inputs.
Connecting Your TV
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)
7