Using The Channel Setup Menu - Sony TRINITRON KV-36FS100 Service Manual

Using the Channel Setup
To access the Channel Setup menu, refer to the following steps:
To Display To Highlight
Press f to highlight an option then press
Favorite 1
Channels
Quick access
2
to favorite
channels
3
4
✍
To use Favorite Channels: Exit all menus and press
desired channel number and press
Use the
Cable
to select it.
On:
Off:
✍
After changing your cable settings, you will need to perform Auto Program.
Use the
Channel Fix
to select it.
Off:
2-6:
AUX 2-6:
Video 1:
To Select
.
Use the F or f buttons to select the position (1-8) where you want to set a
favorite channel, then press
Use the F or f buttons to find the channel you want to add to your favorite
channels.
Press to select the channel. The TV will automatically change to the
selected channel.
Press G to return to the Channel Setup menu or press
.
F or f buttons to select from one of the following options, then press
Select if you are receiving cable channels with a CATV cable.
Select if you are using a TV antenna.
F or f buttons to select from one of the following options, then press
Channel Fix is not set.
Select when you want to control all channel selection through a cable
box or VCR. Select the appropriate channel (usually 3 or 4) and use
the cable box's or VCR's remote control for channel selection.
Use this setting instead of the 2-6 if you want to change channels
using a cable box, VCR or satellite receiver and you've connected it
to the AUX input (KV-27FS200, KV-32FS200, KV-36FS200 only).
Select from available video inputs when you have connected video
equipment (e.g. satellite receiver) and you want your TV fixed to it.
Menu
Video Audio
Favorite Channels
Cable : On
Channel Fix:
Auto Program
Channel Skip/Add
Channel Label
Program favorite
channels
Move:
.
F f
. Press or to move the cursor to the
Using the Menus
Channel Parent Timer Setup Basic
Program
Off
Select: End:
to exit.
27