Yamaha YDS-12 Owner's Manual page 11

• Connecting the dock
1. Set the Mode switch to A(default).
If you're using a Yamaha dock-
compatible audio component that's
listed in the Appendix at the end of this
manual, set the Mode switch to B.
Mode switch
1M:)
A B
Lsee "Appendix· at the
end of this manual.
-------Default
2. Connect one of the plugs of the dock
cable to the dock cable terminal of
this unit firmly.
~
_ _ Connect the plug
with the side with
the release button
facing upward.
3. Make sure the power of the dock-
compatible audio component is
turned off.
Connecting the dock connection cable while
the dock-compatible audio component's
power is on could result in damage.
4. Connect the other plug of the dock
cable to the DOCK jack of the dock-
compatible audio component.
Be sure to connect the plugs of the dock
cable firmly to both the dock cable terminal
of this unit and the DOCK jack of the dock-
compatible audio component. When the
connection is loose, this unit may output
some unwanted noise.
3
En
I