Table of Contents
Advertisement
Main Menu
Table of Contents
Fuses
Checking and Replacing Fuses
If something electrical in your
vehicle stops working, the first thing
you should check for is a blown fuse.
Determine from the chart on pages
299
and
300
, or the diagram on the
fuse box lid, which fuse or fuses
control that component. Check those
fuses first, but check all the fuses
before deciding that a blown fuse is
not the cause. Replace any blown
fuses and check the component's
operation.
296
Taking Care of the Unexpected
1.
Turn the ignition switch to LOCK
(0). Make sure the headlights and
all other accessories are off.
2.
Remove the cover from the fuse
box.
FUSE
BLOWN
3.
Check each of the large fuses in
the under-hood fuse box by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head screw-
driver.
Advertisement
Chapters
Table of Contents
