Table of Contents
Advertisement
Main Menu
Table of Contents
2.
Remove the electrical connector
from the bulb by pulling the
connector straight back.
3.
Remove the rubber weather seal
by pulling on the tab.
4.
Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way and remove the bulb.
5.
Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.
6.
Install the rubber seal over the
back of the headlight assembly.
Make sure it is right side up; it is
marked ''TOP.''
7.
Push the electrical connector onto
the new bulb. Make sure it is
connected securely.
Turn on the headlights to test the
new bulb.
8.
(Driver's side)
Install the front end of the air
intake duct.
Replacing a Front Parking/Turn
Signal Light Bulb
1.
Open the hood. The front
parking/turn signal light is next to
the headlight bulb. On the driver's
side, remove the front end of the
air intake duct by pulling it out.
2.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Maintenance
Lights
CONTINUED
259
Advertisement
Chapters
Table of Contents
