Memory Module - HP ProBook 4320s Maintenance And Service Manual

Memory module

Description
Memory module (PC3-12800, 1333-MHz, DDR3, shared)
4096-MB
2048-MB
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the switch cover (see
6. Remove the keyboard (see
NOTE:
board, and then rotate it right until it rests upside down on the right side of the computer to
remove the memory modules.
Remove the memory module:
1. Position the computer right-side up with the front toward you.
2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
Battery on page
Switch cover on page
Keyboard on page
You can release the keyboard without removing the keyboard cable from the system
57).
59).
61).
Component replacement procedures
Spare part number
641369-002
652972-002
63