Honeywell MagicStat T8132 Programming And Installation Instructions page 5

Acquire tools and items as needed (below). Also purchase two AA alkaline batteries; we
recommend Energizer batteries
WIRE CUTTER/STRIPPER OR SHARP
KNIFE, IF NEEDED TO STRIP WIRES
CROSS-RECESSED
HAND OR POWER
SCREWDRIVER
DRILL WITH 3/16 INCH
DRILL BIT, IF NEEDED TO
DRILL HOLES IN WALL
SPIRIT LEVEL, IF NEEDED TO LEVEL
THERMOSTAT FOR APPEARANCE
MASKING TAPE, IF NEEDED
TO LABEL WIRES AS THEY
ARE DISCONNECTED FROM
OLD THERMOSTAT
3
M 878