Honeywell MagicStat T8132 Programming And Installation Instructions page 28

COOLING
To avoid possible compressor
damage, do not operate the cooling
system when outside temperature
is below 10° C [50° F]. See com-
pressor manu-facturer's instructions
for further information.
NOTE: When cooling setting is
changed, thermostat may delay
up to five minutes before turning
on the air conditioner. This delay
protects the compressor.
Move the system switch to COOL
Cool Off Heat
and the fan switch to AUTO.
Auto On
Press key until setting is about
6° C [10° F] below room tempera-
Cooler
ture. The cooling equipment and fan
should start.
Press key until the setting is about
Warmer
6° C [10° F] above room tempera-
ture. The cooling equipment and fan
should stop.
Cool Off Heat
Move the system switch to OFF,
with the fan switch still at AUTO.
Auto On
The system and fan should be off.
26