Other Operations; Entering Text; Switching The Aspect Ratio Of The Screen; Hold Function - Panasonic Diga DMR-PWT520 Operating Instructions Manual

Other operations

Entering text

Preparation
• Show the "Enter Title Name" screen, etc.
1
Select a character, then press [OK].
Repeat this step to enter other characters.
e.g.,
Name field:
Enter Title Name
_
Delete
Set
OK
RETURN
• To delete a character:
Select the character in the name field, then
press [PAUSE ;].
• To enter characters with number buttons:
e.g., entering the letter "R"
1 Press [7] to
move to the
seventh row.
2 Press [7] twice
to highlight "R".
3 Press [OK].
2
Press [STOP ∫] (Set).
"Writing..." appears then the screen returns
to the previous screen and so on.
To end partway
Press [BACK/RETURN
• If a name is long, parts of it may not be shown in some
screens.
shows the text you have
entered
Space
5
J K L
p p
7 7
qrs qrs
6
M N O
p
7
qrs
7 P Q R
8
T U V
]. (Text is not added.)
Switching the aspect ratio of the
screen
When the image does not match the screen size
of the TV, you can enlarge the image to fill the
screen.
1
Press [OPTION].
2
Select "Aspect", then press [OK].
3
Select the item, then press [OK].
Normal:
Normal output
Side cut:
The black bars on the right and left sides of
the 16:9 image disappear and the image is
enlarged.
Zoom:
The black bars on the top and bottom sides
of the 4:3 image disappear and the image is
enlarged.
• This function does not work when watching 3D programme
and playing back 3D title or 3D photo.
• It may also be adjusted using the screen mode of the TV
etc.
• The screen mode is switched to "Normal" in the following
situations:
- when you change the channel
- when you start or end the playback of a title
- when you switch the unit on or to standby mode.
• [BD-V] [DVD-V] "Side cut" does not have any effect.
• When "TV Aspect" ( 78) is set to "4:3" or "Letterbox", the
"Zoom" effect is disabled.

HOLD function

The HOLD function deactivates all buttons on the
unit and remote control.
Press and hold [OK] and [BACK/RETURN
simultaneously until "X HOLD" appears on the
unit's display.
To cancel the HOLD function
Press and hold [OK] and [BACK/RETURN
simultaneously until "X HOLD" disappears.
Convenient functions
]
Unit's display
]