Easy Setting - Panasonic Diga DMR-PWT520 Operating Instructions Manual

Easy Setting

1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
• The Auto Setup screen appears. It takes
about 3 minutes.
DVB Auto Setup
Progress CH 21
This will take about 3 minutes.
CH Channel Name
35
35
Free TV: 2 Pay TV: 0
Searching
Actual number of channels may differ due to channel duplication.
RETURN
After tuning has been completed, clock will
be set automatically.
• If the region selection screen appears,
select repeatedly until you reach the
available region.
• If the clock setting screen appears, set the
time manually ( 82, Clock).
3
Enter the PIN.
This PIN will be used only for the Owner
ID-Data Entry screen.
You now have the opportunity to enter your
details and help the police to crack crime.
See Instruction Book.
Owner ID
Please enter new PIN
PIN * * * *
0 9
RETURN
1 Press the number buttons to enter 4-digit
PIN.
2 Repeat step 1 to confirm.
• Make a note of PIN in case you forget it.
The PIN number cannot be reset.
• Steps 3 – 5 will be skipped in the Easy
Setting after "Shipping Condition"
( 83) is performed. (
page 20)
68
Type Quality
Free TV
10
10
Free TV
Radio: 0 Data: 0
PIN entry
go to step 6 on
4
Set the Owner ID-Data Entry ("NAME",
"HOUSE NO" and "POSTCODE").
e.g.,
Owner ID-Data Entry
PIN 0000
NAME
HOUSE NO
POSTCODE
Select
Change PIN
RETURN
1 Select the item, then press [OK].
2 Select the character, then press [OK].
Repeat this step.
3 Press [BACK/RETURN
4 Repeat steps 1-3 to enter all data.
5 Press [BACK/RETURN
the Owner ID-Data Entry screen.
5
Enter the new PIN for parental control.
PIN Entry
Enter a new 4-digit PIN, then press OK.
This PIN will be used for controlling viewing and playback.
PIN will be set to "0000" by pressing "RETURN" when there is no
number input.
- - -
Number
RETURN
• The default PIN is "0000".
1 Select the number, then press [1] (right).
Repeat this step.
• Make a note of PIN in case you forget it.
2 Press [OK] twice.
Getting started
].
] to exit from
-
0 9