ELECTRICAL DEVICE
Ignition Coil
Disassembly
Disassembly spark plug cap.
Separating cable, disassembling
installed bolt, then, disassembly
ignition coil.
Assembly
Assembly with sequence in reverse of
disassembly.
✱
WARNNING:
Guide wire must be installed in the
right place.
Conduction Test
Check first coil resistance of ignition
terminal.
Standard valve (20 ): 0.3
✱
WARNNING:
ADLY MOTO
performance tester due to this test has its
own stanard.
Check second coil resistance between
spark plug cap & (-) terminal.
Standard valve : 9.5
VSDUN SOXJ FDS LQ WHDP
Remove spark plug cap from high
Voltage coil.
Check second coil resistance between
high voltage & (-) terminal.
Standard valve : 5
(without spark plug cap)
a
12-7
Check ignition status with
a N
a N