D-Link DIR-850L User Manual page 32

Step.3:.Internet.Connection.(Dynamic.IP.Address)
After selecting the Dynamic IP Address Internet connection method, the following page will appear.
The following parameters will be available for configuration:
MAC.Address:
Clone.Button:
Host.Name:
Primary.DNS.Address:
Secondary.DNS.Address:
Click Next to continue.
Step.3:.Internet.Connection.(PPPoE)
After selecting the PPPoE Internet connection method, the following
page will appear:
The following parameters will be available for configuration:
User.Name:
Password:
Click Next.to continue.
D-Link DIR-850L User Manual
Enter the MAC address of the Internet gate-
way (plugged into the Internet port of this
device) here.
If the configuration PC also acts as the Internet
gateway, then click on the Clone Your PC's
MAC Address button to copy the PC's MAC
address into the space provided. If you're not
sure, leave the MAC Address field blank.
Enter the host name used here. You may also
need to provide a Host Name. If you do not
have or know this information, please contact
your ISP.
Enter the Primary DNS IP address used here.
Enter the Secondary DNS IP address used
here. This field is normally optional. Only
one DNS address is required for a functional
Internet connection, but using a second DNS
address provides more stability.
Enter the PPPoE account user name used here.
This information is given by the ISP.
Enter the PPPoE account password used here.
This information is given by the ISP.
28