Chapter 3 Procedure Of Disassembly; Disassembly Of Stand Unit And Main Body - ViewSonic VG700b Service Manual

Chapter 3 Procedure of Disassembly

3-1

Disassembly of Stand Unit and Main Body

Hinge Cap
1
Rear Arm
1. Lay VG700b Monitor face down to take off Rear Arm and Hinge Cap.
2. Unscrew the four screws to remove the Stand and Main Unit.
Hinge Tilt Unit
3. Unscrew the four screws to remove the Hinge Tilt and Base Unit.
4. Unscrew the four screws on Hinge Tilt unit to remove the Front Arm and Hinge Tilt.
5. Unscrew the four screws on the Base Unit to
ViewSonic Corporation
Main Unit
1
Stand Unit
3
Base Cover
r e move
2
4
5
Base Plate
the Base Cover and Base Plate.
Confidential – Do Not Copy
3-1
VG700b