Advertisement
Setting up the surround
amplifier
Front panel
1/(9
(Power)
_ S-AIRISTANDBY
indicator
~i'""''AA'''
-
-
3
Press
1/(9
(Power) on the
surround amplifier.
The S-AIRISTANDBY indicator turns
green. If not, see "Checking the
transmission status" (page 9) and
"Troubleshooting" (page 11).
4
Set up the speakers.
If the S-AIR main unit has the Auto
Calibration function, perform Auto
Calibration.
If the S-AIR main unit does not have
the Auto Calibration function, perform
the appropriate speaker setting.
Rear panel
S-AIR ID switch
SURROUND
SELECTOR switch
Checking the
transmission status
You can check the status of sound
transmission between the S-AIR main unit
and surround amplifier by checking the
S-AIRISTANDBY indicator on the
surround amplifier.
1
Set the SURROUND SELECTOR
switch as follows.
5.1 channel system: SURROUND
7.1 channel system
for surround speakers: SURROUND
for surround back speakers:
SURROUND BACK
For more information on multi-channel
surround systems, see "Overview"
(page 5).
2
Set the S-AIR 10 switch of the
surround amplifier to match the
10 (A, 8, or C) of the S-AIR main
unit.
S-AIRI
STANDBY
indicator
Turns green.
Flashes green
quickly.
Flashes green
slowly.
Turns red.
Turns off.
Status
The system is turned on,
wireless transmission is
activated and surround
signals are transmitting.
The system is turned on
and wireless transmission
is activated, but surround
signals are not
transmitting.
The system is turned on
and wireless transmission
is deactivated.
The surround amplifier is
in standby mode while the
system is in standby mode
or wireless transmission is
deactivated.
The surround amplifier is
turned off.
gus
Advertisement
