Advertisement
Flashes red.
The surround amplifier's
protection is active.
Preventing transmission
to neighbors (Pairing)
Flashes orange.
The wireless transceiver is
not connected to the
surround amplifier.
• Before the pairing operation
(example)
The sound transmission is established by the
ID.
Neighbor
Neighbor
Your room
Your room
S-AIR main unit
I
IDA
I
~
<.J
-
~
-<,;
----
.Y.
-----
) /
...........
P
P
-------
../..,J
-----
)
~
)
-----
I
IDA
I
I
IDA
I
Surround
Other S-AIR
amplifier
products
S-AIR main unit
No transmission
r-+IDA
I
~
-
~
----
-----
...........
p
-------
-----
)
-----
,.-r.IDA
I
I
IDA
I
Surround
Other S-AIR
amplifier
products
• After the pairing operation
(example)
Sound transmission is established between
the surround amplifier and the S-AIR main
unit that performed the pairing operation.
Pairing
1
Turn on the S-AIR main unit and
the surround amplifier.
The system turns on.
2
Match the IDs of the S-AIR main
unit and the surround amplifier.
Status
S-AIRI
STANDBY
indicator
About the standby mode
The surround amplifier enters standby mode
automatically (the S-AIR/STANDBY
indicator turns red) when the main unit is in
standby mode or wireless transmission is
deactivated.
The surround amplifier is turned on
automatically (the S-AIR/STANDBY
indicator turns green) when the system is
turned on and wireless transmission is
activated.
For details, see "Troubleshooting"
(page 11).
mm
• Depending on the main unit, the surround
amplifier may not enter standby mode
automatically or may not turn on automatically.
In this case, press
1/6
(Power) on the surround
amplifier to change the power mode.
If your neighbors also have S-AIR products
and their IDs are the same as yours, your
neighbors could receive the sound of your
S-AIR main unit. To prevent this, you can
identify your S-AIR products by performing
the pairing operation.
10
US
Advertisement
