Web Configuration
2. Click Privilege Manager>User.
3. Under User, select the locked user account.
4. Click Unlock to unlock the account.
6.14 Protocol
Protocol contains the following sub-menus:
• Protocol
• Security (Not supported)
NOTE: Do not check User Verification in the Security sub-menu, as it may
block ONVIF software from detecting the camera.
6.14.1 Protocol
The Protocol page (Protocol>Protocol) allows you to view ONVIF protocol
settings.
6.15 Device Restart
Click Device Restart. Click Restart then click OK to restart the camera.
52
Select the
user
Click Unlock