Advanced New Message Alerting Features - Panasonic KX-TGE210 Operating Instructions Manual

Key Operation
8 Turn answering system on
MPAUSEN
Pause message
9 or Stop recording
MSTOPN Stop playback
0 Turn answering system off
*3 Erase currently playing
*4
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: "Playback" a MSELECTN
*3 You can also erase as follows:
MPAUSEN a MbN: "Erase" a
MSELECTN a MbN: "Yes" a MSELECTN
Calling back (Caller ID subscribers
only)
1
Press MPAUSEN during playback.
2
MbN: "Call back" a MSELECTN
n Editing the number before calling back
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the
phone number is shown in the desired
format (page 38). a M
Erasing all messages
1
MMENUN#325
2
MbN: "Yes" a MSELECTN a MOFFN
For assistance, please visit http://www.panasonic.com/help
Advanced new message
alerting features
*2
Audible message alert
This feature allows the base unit to beep to
inform you of a new message arrival when
new messages are recorded. The base unit
beeps 2 times every minute until you listen to
the messages, if the "Base unit beep"
setting is turned on. The default setting is
"Off".
1
2
Note:
R When the silent mode is activated
New message alert by a call
This feature allows you to receive a
notification by phone when new messages are
recorded. The base unit calls a phone number
you specify. You can then operate the
answering system remotely to listen to the
new message.
To use this feature, you must:
– store a phone number to which the unit
– turn on the new message alert setting.
After you answer the new message alert call,
N
you can listen to messages from that call
(page 42).
Important:
R A new message alert is stopped 1 minute
Storing a phone number to which the
unit makes an alert call
n From the phonebook:
Answering System
MMENUN#339
MbN: Select the desired setting. a
MSAVEN a MOFFN
(page 33), the base unit beeps will not
sound.
makes the call to.
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
1
MMENUN#338
41