Rear Panel; Connection / Power / Control; Assign Controllers - Prodipe 61 C User Manual

Rear panel

1. MIDI Out: MIDI output interface.
2. Pedal A: PEDAL A input interface, which can connect to pedals of both switching
type and continuous type. It can be assigned as 152 controllers; the initial setting is
soft pedal.
3. Pedal B: PEDAL B input interface, which can connect to pedals of both switching
type and continuous type. It can be assigned as 152 controllers; the initial setting is
sustain pedal.
4. USB : USB interface
5. DC 9V : 9V power input interface (optional)
6. OFF/ON : Power Off/On

Connection / Power / Control

The keyboard gets connected to PC via the USB cable. This connection powers the
keyboard and is used to transfer the MIDI data to PC. In addition, you can connect
to other devices such as a sound module to send out MIDI data via MIDI output port.
The USB interface of 61 C / 49 C displays in PC as USB Audio Device.
The keyboard can also be used when connected to an optional 9V DC power supply.
In this case the MIDI data will only be sent out via the MIDI output port.

Assign controllers

Press EDIT button to enter keyboard multi-function mode, the indicator of EDIT is
on.
Press ASSIGN button to enter controller assignment mode, LED shows CHO,
reminding the user to choose the controller that needs to be assigned. Operate the
very controller to select it (For example, if you want to assign SLIDER, slide the
SLIDER to select), the LED shows the controller number of the selected controller,
input the desired assignable parameter value with numeric pad, and press ENTER to
confirm (for example, if Slider is selected, input 147 and the Slider is assigned as
Master Volume Controller).
Assignable controllers reference: Appendix 1- Assignable controller List
Assignable controller parameters reference: Appendix 2-Assignable Controller
Parameter List.
Copyright © 2008 IPE Music
1 2 3 4 5 6
3