Front Panel - Prodipe 61 C User Manual

Operations

Front panel

5 6 1
1. Edit button: It is to open/close keyboard multi-function.
2. DATA +/- buttons: They are assignable buttons, which could be assigned as 160
controllers. The initial setting is 154th controller: octave adjustment.
3. Switch button: It is to switch function groups of dials R1~R4 and R5~R8.
4. Slider: It is an assignable fader that can be assigned as 148 controllers. The initial
setting is 147th controller: master volume.
5. Pitch bend wheel: It is an assignable wheel that can be assigned as 148 controllers.
The initial setting is 146th controller: pitch bend wheel.
6. Modulation wheel: It is an assignable wheel that can be assigned as 148 controllers.
The initial setting is 1st controller: modulation wheel.
7. R1~R8 Dials: These are assignable dials with an independent channel distributed to
each dial, and each dial can be assigned as 160 controllers.
* The initial channel of R1~R4 is 0, initial controller numbers are 152, 153, 156, 157,
which controls program, channel, tempo and keyboard velocity curve respectively.
* The initial channels of R5~R8 are 0~3, initial controller number is 7, which
controls the volume of channels 0~3 respectively.
* The function group of R1~R4 and R5~R8 is switched by SWITCH button.
8. Multi-functional Keyboard: This function is turned on/off by EDIT button. When it
is on, the keyboard provides functions shown printed above the keyboard, including
program adjustment, dual, touch sensitivity adjustment, numeric pads, and etc.
9. Constant Controller Parameter
10. EDIT Indicator: When EDIT indicator is on, keyboard multi-function is on, vice versa.
11. OCTAVE/TRANSPOSE Indicator:
* When the indicator is on, it indicates that there's upper/lower octave adjustment.
* When the indicator flickers slowly, it indicates that there's upper/lower transpose
adjustment.
* When the indicator flickers quickly, it indicates that there's upper/lower octave
and transpose adjustment at the same time.
* When the indicator is off, it indicates that there's no upper/lower octave nor
transpose adjustment.
12. Dial Function Group Indicator:
When the corresponding indicator of R1~R4 is on, the current dial function group is
R1~R4; if the indicator of R5~R8 is on, the current dial function group is R5~R8.
13. LED: It is to display the current number/status information.
10 11 13 4 12 3
2
Copyright © 2008 IPE Music
7 8 9
2