Pedal Polarity (61 C / 49 C Only); Switch Dial Function Groups - Prodipe 61 C User Manual

System Message Window style E.g. Cakewalk :
From 61 C / 49 C / 25 C to computer (UPLOAD) :
(Operate 61 C / 49 C / 25 C in the same way as under Record Style, only different
operation in sequencer software.)
1) Use USB cable to connect computer and 61 C / 49 C / 25 C.
2) Set 61 C / 49 C / 25 C parameters.
3) Open a new MIDI project in Cakewalk.
4) Select 61 C / 49 C / 25 C as MIDI input and neglect output.
5) Open system message window: VIEW->SYSX; select a BANK and press the down
arrow; select YOU START DUMP ON INSTRUMENT and then Cakewalk enters into
system message receive mode.
6) Press EDIT button to enter keyboard multi-function mode, and then press UPLOAD,
61 C / 49 C / 25 C enters into system message upload mode. LED displays SEu. After
upload completes, LED displays don.
7) Use SAVE in Cakewalk to save received message in *.SYS format.
System Message Window style E.g. Cakewalk:
From computer to 61 C / 49 C / 25 C (DOWNLOAD):
1) Use USB cable to connect computer and 61 C / 49 C/ 25 C.
2) Open a new MIDI project in Cakewalk.
3) Select 61 C / 49 C / 25 C as MIDI output
4) Open system message window: VIEW->SYSX; select a BANK and import saved system
message file.
5) Press EDIT button to enter keyboard multi-function mode, and then press
DOWNLOAD, 61 C / 49 C / 25 C enters into system message download mode. LED
displays SEd.
6) Use Cakewalk system message send function to send system message to 61 C / 49
C/ 25 C.
7) LED displays don after 61 C / 49 C / 25 C finishes receiving correct system message.
8) System starts SNAP SHOT function to transmit download setting message to sequent
device.

Pedal polarity (61 C / 49 C only)

System can recognize or change pedal polarity. If you want pedal to transmit PEDAL
ON message while pressing the pedal and PEDAL OFF message while releasing the
pedal, you do not need to do any adjustment. Otherwise, you can press down the
pedal while switching on this unit and release the pedal after the unit is turned on.
Press EDIT button to enter keyboard multi-function mode, and press PEDAL A
POLARITY or PEDAL B POLARITY to adjust pedal polarity.

Switch dial function groups

Press SWITCH to shift dial function group between R1~R4 or R5~R8.
Copyright © 2008 IPE Music
8