Connecting The Mains Adapter To The Port Replicator; Switching On The Notebook Via The Port Replicator; Switching Off Notebook Via Port Replicator - Fujitsu CELSIUS H720 Operating Manual

Working with the notebook

Connecting the mains adapter to the Port Replicator

2
When the notebook is connected to a Port Replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the setting is
saved as to which monitor was last used for output. This profile will be loaded, as
soon as the notebook is connected to a Port Replicator of the same type.

Switching on the notebook via the port replicator

Switching off notebook via Port Replicator

► Close all applications and shut down your operating system (please refer
to the manual for the operating system).
If the notebook cannot be shut down properly, press the ON/OFF button
on the Port Replicator for approx. four seconds. The notebook will switch
off. Any unsaved data may however be lost.
48
1
3
► Connect the mains adapter cable to the DC
jack (DC IN) of the Port Replicator (1).
► Connect the power cable to the
mains adapter (2).
► Plug the power cable into the mains
socket (3).
► Press the ON/OFF switch on the port
replicator to switch the notebook on.

The power-on indicator of the Port
Replicator lights up.
Fujitsu Technology Solutions