Connecting An External Monitor - Fujitsu CELSIUS H720 Operating Manual

Connecting external devices

Connecting an external monitor

An analogue monitor is connected to the analogue VGA monitor port, a digital monitor
to the DisplayPort or to the DVI-D monitor port on the optional Port Replicator.
Monitor output is limited to a maximum of two monitors at any one time (see
combinations", Page
Monitorport Monitorport VGAconnection socket Monitor
Digital DisplayPort
Digital DVI-D monitor port (on the optional Port
Replicator)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
60
24, section "Toggle output monitor").
"Key combinations", Page
Analogue VGA monitor port
24.
"Key
Fujitsu Technology Solutions