Connecting The Notebook To The Port Replicator - Fujitsu CELSIUS H720 Operating Manual

Connecting the notebook to the Port Replicator

If you connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
The mains adapter must be connected to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD monitor closed when
the notebook is connected to the Port Replicator. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.
PortReplicator
► Switch the notebook off.
► Remove the power plug of the mains adapter from the mains socket.
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
► Position the notebook so that it is in line with the back edge of the Port Replicator.
► Push the notebook onto the Port Replicator in the direction of the arrow
(1) until you notice it engage.
Fujitsu Technology Solutions
1
Working with the notebook
47