Makita LS1040 Instruction Manual page 9

Dust baa
I
The use-of the dust bag makes cutting
operations clean and dust collections easy.
To attach the dust bag, fit the bags entry
port over the dust spout.
When the dust bag is about half full,
remove the dust bag from the tool and pull
the fastener out. Empty the dust bag of its
contents, tapping it lightly so as to remove
particles adhering to the insides which
might hamper further collection.
Switch action
To prevent the trigger from being acciden-
tally pulled, a lock-off button is provided.
To
start the tool, press in the lock-off but-
ton and pull the trigger. Release the trigger
to stop.
I
\
Dust SDout
-
Fastener
/
I-------
Lock-off
button
CAUTION:
*Before plugging in the tool, always check to see that the switch trigger actuates properly
*When not using the tool, remove the lock-off button and store it in
a
secure place. This
*Do not pull the trigger hard without pressing in the lock-off button. This can cause break-
and returns to the "OFF" position when released.
prevents unauthorized operation.
age of the switch.
9