Makita LS1040 Instruction Manual page 7

Carrying tool
When carrying the tool, lower the handle
fully and press the stopper pin to lock the
handle in the lowered position. Secure the
turn base by means of the grip. The tool can
then be conveniently carried by the carrying
grip.
WARN
I
NG :
Be sure that the tool is unplugged first.
Carrying grip
I
Installing auxiliary plate
Install the auxiliary plate using the notch in the tool's base and secure it by tightening the
hex bolt
Auxiliary plate
- ,
Hex bolt
\ - 7 7 b
M
Bench mounting miter saw
Auxiliary plate
Hex bolt
~
Base
Nut
I
7
T-
Removing or installing saw blade
CAUTION:
Always be sure that the tool is switched off
and unplugged before removing or installing
the blade.
To remove the blade, use the socket
wrench to loosen the hex bolt holding the
center cover by turning it more than three
turns counterclockwise. Raise the safety
cover and center cover.
~
Socket wrench
7