Endless Summer 153100 Owner's Manual page 4

Step
Assemble emitter
6
A . Curl emitter screen into a circle . Overlap ends and line up holes . Secure using 2
medium screws (C) and 2 medium nuts (J) .
B . Attach emitter screen to emitter top using 4 medium screws .
Note: Do not fully tighten screws until all screws are in place .
C . Attach emitter screen to engine using 4 medium screws (C) .
Note: Do not fully tighten screws until all screws are in place .
Step
Attach enigne to post
7
A . Remove control knob and engine access panel .
B . Attach engine to post using 4 large screws (D) .
Note: Do not fully tighten screws until all screws are in place .
Step
Attach post/engine assembly
8
Attach post/engine assembly to base using 4 large screws (D) .
Note: Do not fully tighten screws until all screws are in place .
®
Outdoor Patio Heater Model No. 153100
Step
Attach gas line/regulator assembly
9
Attach gas line/regulator assembly to gas line .
Step
Attach dome
10
Attach dome to emitter using 3 cap nuts (L) .
Step
Secure gas line
11
Attach gas line clip to brace using extra large screw (E) .