Part Number Information - IBM 10GBE Product Manual

Part number information

Table 1. Ordering part number and feature code
Description
Emulex 10GbE Virtual Fabric Adapter II for IBM BladeCenter
Emulex 10GbE Virtual Fabric Adapter II Advanced for IBM BladeCenter
Emulex 10GbE Virtual Fabric Advanced Upgrade for IBM BladeCenter
The adapter part number includes the following items:
One Emulex 10GbE Virtual Fabric Adapter II or Emulex 10GbE Virtual Fabric Adapter II Advanced

Documentation CD

Important Notices flyer

The standard Emulex 10GbE Virtual Fabric Adapter II can be upgraded to the same features as the
Emulex 10GbE Virtual Fabric Adapter II Advanced with the addition of the Emulex 10GbE Virtual Fabric
Advanced Upgrade option, part number 49Y4265.
Features
Emulex Virtual Fabric Adapter II and Emulex Virtual Fabric Adapter Advanced II have these features:
Connection to either 1 Gb or 10 Gb data center infrastructure (1 Gb and 10 Gb auto-negotiation)

PCI Express 2.0 x8 host interface

IBM BladeCenter CFFh form factor, can be combined with a CIOv expansion card on the same blade

server
It operates either as an 8-port virtual NIC or as a 2-port 1/10 Gb Ethernet adapter:

Virtual port bandwidth allocation in 100 Mbps increments

Supports up to eight virtual ports

Wake On LAN support

Full-duplex (FDX) capability

Bus-mastering support

Direct memory access (DMA) support

Preboot Execution Environment (PXE) support

IPv4/IPv6 TCP, UDP checksum offload

Large send offload (LSO)

Large receive offload

Receive side scaling (RSS)

IPv4 TCP Chimney Offload

TCP Segmentation Offload

VLAN insertion and extraction

Jumbo frames up to 9000 bytes

Load balancing and failover support including adapter fault tolerance (AFT), switch fault tolerance

(SFT), adaptive load balancing (ALB), teaming support, and IEEE 802.3ad
Emulex 10GbE Virtual Fabric Adapter II for IBM BladeCenter
Part number Feature code
90Y3550 A1XG
90Y3566 AIXH
49Y4265 2436
2