Page 1
Instruction Manual Installing PF1-500, PF1-500R & PF2-500R Amplifi ers Into CFX Series Loudspeakers...
Page 2
Balance Control plate in place and set them aside. You’ll need them to reinstall the Balance Control plate. If you are installing a PF1-500 or PF1- 500R amplifier, you do not need to remove the Balance Control so you can skip this step and proceed directly to Step 7.
Page 3
(Crossover Network) and it no longer will have any effect on the loudspeaker’s performance. Step 7. If you are installing a PF1-500 or PF1-500R amplifier, connect the white 2-pin connector to the amplifier. Note that this keeps the Balance Control (Crossover Network) in the audio path.
Page 4
19201 Cook Street, Foothill Ranch, CA USA Phone: +1 949 588 9997 • Fax: +1 949 588 9514 sales@renkus-heinz.com • www.renkus-heinz.com RH 735 August 2011...