Gigabyte GA-D525TUD User Manual page 20

& Onboard LAN Boot ROM
Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default:
Disabled)
& Onboard Serial Port 1
Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.
Options are: Auto, 3F8/IRQ4 (default), 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled.
& Onboard Serial Port 2
Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.
Options are: Auto, 3F8/IRQ4, 2F8/IRQ3 (default), 3E8/IRQ4, 2E8/IRQ3, Disabled.
& Onboard Parallel Port
Enables or disables the onboard parallel port (LPT) and specifies its base I/O address and corresponding
interrupt. Options are: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled.
& Parallel Port Mode
Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)
(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.
& USB 1.0 Controller
Enables or disables the integrated USB 1.0 controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
& USB 2.0 Controller
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
& USB Keyboard Function
Allows USB keyboard to be used in MS-DOS. (Default: Disabled)
& USB Mouse Function
Allows USB mouse to be used in MS-DOS. (Default: Disabled)
& USB Storage Function
Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during
the POST. (Default: Enabled)
- 20 -