PHICOMM FD-364N User Manual page 25

150Mbps Wireless N ADSL2/2+ Modem Router
www.phicomm.com
2．Static IP
Select this option if your ISP provides static IP information to you. You should set Static IP
Address, IP Subnet Mask, and Gateway on the screen below.
Note: Each IP address entered in the fields must be in the appropriate IP form, which is four IP
octets separated by a dot (x.x.x.x), such as 192.168.1.100. The Router will not accept the IP
address if it is not in this format.
Chapter 4: Software Configuration
20