Initial Operating Instructions; Start-Up And Re-Fill Procedures - Saratoga Spa LUXURY SERIES Owner's Manual

I

Initial Operating Instructions:

Start-Up and Refill Pr ocedur es
Your Saratoga Spa has been tested at the manufacturing plant to ensure that all the spas
functions operate. During the test procedure, a small amount of water may have remained in
the spas plumbing.Through the shipping process water may have spotted the spas shell.You
may need to wipe down the shell with a soft cloth. Please read and follow the start-up
instructions to ensure a successful start-up or refill.
Important:
• Inspect and clean spa shell of any debris
• Do not turn power on to spa unless filled with water to appropriate level (See Page 25).
The spa
damage to the heater and/or
• Do not fill spa with water before checking the items below (below items may
become loose
• Do not fill spa with hot water. This may cause a false error code to the high limit
sensor.
24
pack must never be operated without water in the spa; serious
in transit):
A
A
C
C
pump(s) may result.
a) Hand tighten unions at the pumps
b) Tighten drain valve
Note: Drain Valve is left open
for shipping - drain valve must
c) Tighten unions on heater