Features And Controls - Briggs & Stratton Pressure Washer Operator's Manual

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Spray Tips — Detergent, 0°, 15° and 40°: for various
high pressure cleaning applications.
C - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
D - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
E - Nozzle Extension with Quick Connect — Allows you to
switch between four different spray tips.
F - Choke Lever — Prepares a cold engine for starting.
G - Fuel Valve — Used to turn fuel supply on and off to
engine.
H - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
J - Air Filter — Protects engine by filtering dust and debris
out of intake air.
K - Recoil Starter — Used for starting the engine manually.
L - Detergent Siphoning Tube/Filter — Use to siphon
pressure washer safe detergent into the low pressure
stream.
M - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
N - Water Inlet — Connection for garden hose.
P - Oil Drain — Drain engine oil here.
R - High Pressure Outlet — Connection for high pressure
hose.
S - Pump — Develops high pressure.
T - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
Items Not Shown:
Identification Label (near rear of base plate) — Provides
model and serial number of pressure washer. Please have
these readily available if calling for assistance.
Oil Fill — Check and add engine oil here.
Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.
T
S
R
P
N
M
L
11