Table of Contents
Advertisement
Verify that the power supply being used at the time of the
failure is operating correctly. (See "Power System
Checkout" on page 14.)
1. Power off the computer.
2. Visually check for damage. If any problems are found,
replace the FRU.
3. Remove or disconnect all of the following devices:
a. Non-IBM devices
b. Printer, mouse, and other external devices
c. Battery ASM
d. Hard disk drive
e. DIMM
f. PC Cards (PCMCIA)
4. Power on the computer.
5. Determine if the problem has changed.
6. If the problem does not recur, reconnect the removed
devices one at a time until you find the failing FRU.
7. If the problem remains, replace the following FRUs one
at a time. Do not replace a non-defective FRU.
a. System board
b. LCD panel ASM
26
ThinkPad s30, s31
Advertisement
Table of Contents
