Table of Contents
Advertisement
Chapter 2 – Qio Enclosure Description
1 – Power Indicator LED
This indicator lights when Qio is powered. Qio must be
powered in order to operate.
2 – SxS Media Slots
These slots accept both SxS memory cards and ExpressCard/34
adapter cards. Use the included Sonnet multimedia memory
card adapter in these slots to work with Memory Stick, SDHC,
SD, MMC, and xD-Picture memory cards.
6 – Security Slot
This slot works with Kensington
locks to secure the Qio enclosure and deter theft.
7 – eSATA Ports
These connect eSATA data cables. Each port supports
individual drives, or up to five SATA hard disk drives (or SSDs)
in enclosures with an eSATA interface, and a port multiplier
or built-in hardware RAID controller.
8 – PCIe x1 Connector
This connects the included interface cable between the Qio
enclosure and the PCIe bus extender card in your computer.
brand and similar security
®
3 – P2 Media Slots
These slots accept both P2 memory cards and CardBus
adapter cards.
4 – Eject Buttons for P2 Media Slots
Press these buttons to eject cards from the P2 slots.
5 – CF (CompactFlash) Card Slots
These slots accept Type I CF memory cards. Qio is not
compatible with Type II (Microdrive, etc.; 5mm thick) CF cards.
9 – 12VDC Input Socket
Connect either the included AC power adapter cable, or the
included XLR power adapter cable (connected to an external
battery or other power source) to power the Qio enclosure.
10 – 12VDC Output Sockets
Use these sockets to power connected Sonnet Fusion
2-drive RAID SATA storage systems. DO NOT CONNECT
POWER INPUT CABLES HERE.
2
F2
™
Advertisement
Table of Contents
