09/08/05 17:30:39 32KTGC00_086
4.
Remove the element cover ( ) by
releasing the tab ( ).
7
5.
Remove the element ( ).
(7)
(6)
(6) Element cover
(7) Tab
76
6
6.
Wash the element in clean, nonflammable
or high flash point solvent and let it dry
8
thoroughly.
Never use petrol or low flash point
solvents for cleaning the air cleaner. A
fire or explosion could result.
Allow the element to dry thoroughly
before installation.
Do not apply oil to the element;
damage to the drive belt will occur.
7.
Installation can be done in the reverse
order of removal.
(8)
(8) Element