Viewing Device Status; Gps; Power - Navigon 8100T User Manual

Basic Operations

Viewing device status

Viewing device status
Symbols located at the top right of the screen are used to display information.

GPS

The GPS symbol can show the following GPS reception status:
No Symbol
No Signal
GPS Ready
For more information, see "About GPS navigation" on page 7.

Power

For more information on recharging your device, see "Charging the battery" on
page 12.
The Power symbol can display the following conditions of the built-in battery:
The device is powered by an external power source. The battery is charging.
The device is powered by its internal battery. Battery is fully charged.
The device is powered by its internal battery. Battery charge is sufficient.
The device is powered by its internal battery. Battery charge is low.
Caution! When the No Battery (
remaining. The device will soon turn off. S
Caution! Do not attempt to replace the battery. For problems related to the battery, con-
tact NAVIGON Customer Support.
26
The built-in GPS receiver is not operational. Contact customer
service if the problem persists.
Data is being received from fewer than three satellites. Position
cannot be calculated.
Data is being received from at least three satellites. Position can
be calculated.
NAVIGON 8100T User's Guide
NAVIGON, INC.
) icon displays, the battery has no power
ee "Charging the battery" on page 12.
November 2008