Root AP SSID
Site Survey
Wireless Module
Click "Apply" to save the changes, or click "Cancel" to discard the changes. After you
have clicked "Apply", you will see the following message:
Click "Apply" to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click "Continue" to configure other settings.
Note: If you have a pop‐up blocker installed, you
may have to disable it, or set it to allow the pop‐up
window to show up.
Input the SSID of the wireless access point with
which you wish to connect.
Click "Select Site Survey" and a pop‐up window will
appear. All reachable wireless access points will be
shown in the window. Select a wireless access point
from the list, and click "Done" to establish a
connection. Clicking "Refresh" will renew the list.
Select "Enable" to turn on the 5GHz wireless signal
and select "Disable" to turn it off.
98