Table of Contents
Advertisement
3‐5‐1‐1 AP Mode
The following settings will appear in "AP" mode:
Item Name
Band
ESSID
Channel Number
Associated Clients
Description
Select from one of the following options:
5GHz (A): Allows 802.11a wireless network clients to
connect to this router.
5GHz (N): Allows 802.11n wireless network clients to
connect to this router (maximum transfer rate
450Mbps).
5GHz (A+N): Allows 802.11a and 802.11n wireless
network clients to connect to this router
(recommended).
This is the name of your router. You can type any
alphanumerical character here (maximum 32
characters).
Select a channel from the dropdown menu. You can
select the channel of your preference (1 to 140).
Click "Show Active Clients" for the list of all
connected wireless clients. Click "Refresh" in the
new window to renew the list, and click "Close" to
close the window.
Note: If you have a pop‐up blocker installed, you
may have to disable it, or set it to allow the pop‐up
window to show up.
87
Advertisement
Table of Contents
