Vap0-3 Setup - Ovislink Air Live WIAS-3200N v2 User Manual

The administrator can create Virtual AP via this page. Please click on Wireless > Virtual
AP Setup and follow the below setting.
VAP: Indicate the system's Virtual AP.MAC Address: The MAC address of the VAP
Interface is displayed here. When you enable AP and reboot system, the MAC
address will display here.
ESSID: Indicate the ESSID of the respective Virtual AP
Status: Indicate the current Status of the respective Virtual AP. The VAP0 always on.
Security Type: Indicate a used security type of the respective Virtual AP.
MAC Filter: Indicate a used MAC filter of the respective Virtual AP. Click this option to
configure MAC Filter of the respective Virtual AP.
Edit: Click this option to configure Virtual AP's settings

5.3.1 VAP0-3 Setup

For each Virtual AP, administrators can configure general settings and security type.
Click Wireless > Virtual AP, click "Edit" of Virtual AP List and then Virtual AP
Configuration page appears.
AirLive WIAS-3200N v2 User's Manual
5 Configure Wireless Connection
86