Table of Contents
Advertisement
Appendix G. Network Configuration on PC & User Login
Step 3.
Click on the General tab and
choose "Internet Protocol
(TCP/IP)", and then click
Properties. Now, you can choose to
use DHCP or a specific IP address.
Step 4.
Using Specific IP Address: If you
want to use a specific IP address,
acquire the following information
from the network administrator: the
IP Address, Subnet Mask and DNS
Server address provided by your
ISP and the Gateway address of
WIAS-3200N v2.
If choose Using DHCP: If you want
to use DHCP, choose "Obtain an IP
address automatically" and click
OK. This is also the default setting
of Windows. Then, reboot the PC to
make sure an IP address is obtained
from WIAS-3200N v2.
*Caution!!
If your PC has been set up
completely, please inform the
network administrator before
proceeding to the following steps.
161
AirLive WIAS-3200N v2 User's Manual
Advertisement
Table of Contents
