Brewing Better - Bunn SINGLE SERVE POD BREWER Use & Care Manual

1. Press down on the button located on top of Pod Drawer
2. Place coffee or tea pod in Pod Drawer cavity.
3. Slide Pod Drawer into Drawer Guides and push in to lock
4. Open Spin Lid on top of brewer.
5. Using your preferred cup, fill Pour-In-Bowl with desired
6. Close Spin Lid on top of brewer and position cup on
7. For regular brew, push the Brew Button.
8. At end of brew cycle, remove cup from Drip Tray.
IMPORTANT: Distilled water is not recommended for brewing coffee as it lacks the minerals to bring out the
natural flavors of coffee. Some common bottled water may also be too purified. If you want to use bottled water,
look for words like "filtered", "spring water", "mineral water" or "drinking water". Avoid using bottled water with
words like "purified", "distilled" or "mineral free". Your BUNN My Café brewer may not function with water that
has insufficient mineral content.

BREWING BETTER

MY CAFÉ SINGLE SERVE POD BREWER
®
handle and pull Pod Drawer out along the Drawer Guides.
Center pod in holder and gently press the pod completely into the
Pod Drawer cavity. Ensure that pod is fully seated.
into place.
Pod Drawer must be locked into place before brewer will operate.
amount of water (minimum 4 oz., maximum 14 oz.).
Note: the cup positioned on Drip Tray and under the Pod Drawer
must be larger than the amount of water used.
Drip Tray under Pod Drawer.
Note: be sure cup is heat resistant.
For bolder brew or for tea, push the Pulse Button to set the pulse
feature and then push the Brew Button.
Dispose of used pod by removing the Pod Drawer (see #1) and
flipping the pod into a waste container. Do not touch hot pod!
4